Kucht KPD361F Manuel d'utilisateur télécharger pdf (Page 22)

MANUAL SHUT-OFF VALVE

THIS VALVE IS NOT SHIPPED WITH THE APPLIANCE AND MUST BE

SUPPLIED BY THE INSTALLER.

The manual shut-off valve must be installed in the gas service line

between the gas hook-up on the wall and the appliance inlet, in a

position where it can be reached quickly in the event of an emergency.

In Massachusetts: A T handle type manual gas valve must be

installed in the gas supply line to this appliance.

FLEXIBLE CONNECTIONS

In case of installation with flexible couplings and/or quick-disconnect

fittings, the installer must use a heavy-duty, AGA design-certified

commercial flexible connector of at least 1/2" (1.3 cm) ID NPT

(with suitable strain reliefs) in compliance with ANSI Z21.41 and

Z21.69 standards.

In Massachusetts: The unit must be installed with a 36" (3-foot) long

flexible gas connector.

In Canada: use CAN 1-6.10-88 metal connectors for gas appliances

and CAN 1-6.9 M79 quick disconnect device for use with gas fuel.

PRESSURE TEST-POINT STOPPER VALVE

To avoid gas leaks, the pressure test-point stopper valve and gasket

supplied with the range must be installed on the gas fitting at the

back of the range according to the diagram below

INSTALL GUIDE

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 40 41

Pas de commentaire

Kucht KPD361F Manuel d'utilisateur Page 22