Kucht KPD361F Manuel d'utilisateur télécharger pdf (Page 21)

GAS CONNECTION

All gas connections must comply with national and local codes. The

gas supply line (service) must be the same size or greater than the

inlet line of the appliance. This range uses a 1/2" NPT inlet

(see drawing below for details of gas connection). On all pipe joints

use appropriate sealant resistant to gas.

This range can be used with Natural or LP/Propane gas. The range is

shipped from the factory for use with natural gas.

For LP/propane household installation, the appliance must be

converted by the dealer, by a factory-trained professional or by a

qualified licensed plumber or gas service company.

Gas conversion is important for safe and effective use of the appliance.

It is the responsibility of the dealer and the owner of the range to

perform the appropriate gas conversion following the directions of the

manufacturer.

THE GAS CONVERSION PROCEDURE IS DESCRIBED IN THIS

MANUAL AND IN THE PACKAGE CONTAINING THE CONVERSION

NOZZLES SHIPPED WITH EVERY RANGE.

Please provide the service person with this manual before work is

started on the range.

Leak testing of the appliance shall be conducted according to the

manufacturer's instructions. Before placing the oven into operation,

always check for leaks with soapy water solution or other acceptable

method.Check for gas leakage with soapy water solution or other

acceptable methods in all gas connections installed between inlet gas

pipe of the appliance, gas regulator, till to the manual shut-off valve.

DO NOT USE AN OPEN FLAME WHEN CHECKING FOR LEAKS!

WARNING

INSTALL GUIDE

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 40 41

Pas de commentaire

Kucht KPD361F Manuel d'utilisateur Page 21